Golden-lighting 2073-SF WG Instrukcja Użytkownika

Przeglądaj online lub pobierz Instrukcja Użytkownika dla Oświetlenie Golden-lighting 2073-SF WG. Golden Lighting 2073-SF WG User Manual Instrukcja obsługi

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 2
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 0
Assembly Instructions: 2073-SF (Smyth)
IMPORTANT:
• ALL INSTALLATION WORK SHOULD BE DONE BY ACCREDITED PROFESSIONAL.
• SHUT OFF POWER SUPPLY AT FUSE OR CIRCUIT BREAKER!
• USE ONLY THE SPECIFIED BULBS. DO NOT EXCEED THE MAXIMUM WATTAGE!
PREPARING FOR INSTALLATION
Remove all of the contents from the carton. See the important
notes above. Shut off the power at the circuit breaker and
completelyremovetheoldxturefromtheceiling,includingthe
oldmountingstrap.
Mountingstrap(B)containsseveralpairsofthreadedholes.
Findthepairofholesthatmatchesthespacingoftheholes
onthejunctionbox.Twoofmountingscrews(A)shouldbe
attachedtomountingstrap(B).Youmayneedtotightenthe
nuts(C)thatholdthesescrewsinplace.Placemountingstrap
(B)overthejunctionboxsothatmountingscrews(A)are
pointingdown.Securemountingstrap(B)tothejunctionbox
withmountingscrews(D)andascrewdriver.Tightenthescrews
securely.
Placethexturebodyonaatsurface.Rod(N)isonthexture
wires,butnotattachedtothebodyofthexture.Passthe
xturewiresthroughRod(N)andpullthewiresuntiltaut.Twist
rod(N)ontothexturebodyuntilsecure.Attachrods(M)tothe
hooksonthexturebody.Haveanassistantholdthecanopy
abovethexturebody,thenattachrod(N)tocanopy(F).Attach
rods(M)tothehooksoncanopy(F).Pushthewiresthroughthe
center of canopy (F).
CONNECTING THE WIRES
Haveanassistantorassistantssupportthextureweight
whilecompletingthewiring.Cutawayexcesswire.Attachthe
xture’swirestothepowersupplywiresfromthejunctionbox.
Connect black to black (or smooth); white to white (or ribbed);
groundtoground(greenorcopper).Twisttheendsofthewire
pairstogether,thentwistonawireconnector.Makesureall
twistsareinthesamedirection.Ifthereisnogroundwire(green
orcopper)fromthejunctionbox,locategroundscrew(E)on
mountingstrap(B)andwrapthexturegroundwirearoundthe
greengroundscrew(E).Useascrewdrivertosecureground
screw(E)ontothemountingbracket.Tuckallwiresneatlyinto
thejunctionbox.
FINISHING THE INSTALLATION
Raisecanopy(F)totheceiling.Positionmountingscrews(A)so
thattheyprotrudethroughtheopeningsofcanopy(F).Secure
canopy (F) with decorative nuts (G).
Slidecandlesleeves(Q)overthesockets.Installlightbulbs(O)
(notincluded)inaccordancewiththexture’sspecications.
Placeglassshade(S)ontobottomcap(T).Raiseglassshade
upbeneathbottomassembly(R).Twistbottomnial(U)ontothe
threadsofbottomassembly(R).Tightensecurely.
Your installation is complete. Turn on the power and test the
xture.
For Customer Service, contact the
place of purchase to arrange for
replacement parts.
CLEANING TIPS
Treat the xture gently! Regular cleaning will reduce the need for deep cleaning. For regular cleaning, turn off the light and wipe down the
xture with a clean lint-free cotton or microber cloth. Never spray cleaner directly onto the xture. For deep cleaning, turn off the light
and remove the glass prior to cleaning. Hand wash glass with warm water and mild detergent. Dry with a lint-free or microber cloth.
D
C
B
A
S
T
U
M
N
P
O
Q
E
F
G
R
FLUSH
INSTALLATION
BLACK
(Hot)
WHITE
(Neutral)
GREEN
(Ground)
HOUSE WIRES
SMOOTH
(Or Black)
FIXTURE WIRES
RIBBED
(Or White)
BARE COPPER
(Or Green)
Przeglądanie stron 0
1 2

Podsumowanie treści

Strona 1

Assembly Instructions: 2073-SF (Smyth)IMPORTANT: • ALL INSTALLATION WORK SHOULD BE DONE BY ACCREDITED PROFESSIONAL. • SHUT OFF POWER SUPPLY AT FUSE

Strona 2

Assembly Instructions: 2073-SF (Smyth)IMPORTANT: • ALL INSTALLATION WORK SHOULD BE DONE BY ACCREDITED PROFESSIONAL. • SHUT OFF POWER SUPPLY AT FUSE

Powiązane modele: 2073-SF GMT | 2073-SF |

Komentarze do niniejszej Instrukcji

Brak uwag