Golden-lighting 9942-WSC GL Instrukcja Użytkownika Pobierz pdf

Assembly Instructions: 9942-WSC GL (Aiyana)

IMPORTANT:

• ALL INSTALLATION WORK SHOULD BE DONE BY ACCREDITED PROFESSIONAL.

• SHUT OFF POWER SUPPLY AT FUSE OR CIRCUIT BREAKER!

• USE ONLY THE SPECIFIED BULBS. DO NOT EXCEED THE MAXIMUM WATTAGE!

PREPARING FOR INSTALLATION

Carefully remove all of the contents from the carton. See the

important notes above. Shut off the power at the circuit breaker

andcompletelyremovetheoldxturefromthewall,including

theoldmountingstrap.

Mountingstrap(A)containsseveralpairsofthreadedholes.

Findthepairofholesthatmatchesthespacingoftheholeson

thejunctionboxandyourxturebackplate.Twoofmounting

screws(B2)shouldbeattachedtomountingstrap(A).You

mayneedtotightenthenutsthatholdthesescrewsinplace.

Pullthehousewiresthroughthecenterofmountingstrap(A).

Placemountingstrap(A)overthejunctionboxsothatmounting

screws(B2)arehorizontal,andinalignmentwiththehole

locationsonthexturebackplate.Securemountingstrap(A)to

thejunctionboxwithmountingscrews(B2)andascrewdriver.

Tightenthescrewssecurely.

CONNECTING THE WIRES

Haveanassistantsupportthextureweightwhilecompleting

thewiring.Cutawayanyexcesswires.Threadthexturewires

throughthecanopy.Attachthexture’swirestothepower

supplywiresfromthejunctionbox.Connectblacktoblack(or

smooth);whitetowhite(orribbed);groundtoground(greenor

copper).Twisttheendsofthewirepairstogether,thentwiston

a wire connector. Make sure all twists are in the same direction.

Ifthereisnogroundwire(greenorcopper)fromthejunction

box,locategroundscrew(E)onmountingstrap(A)andwrap

thexturegroundwirearoundthegreengroundscrew(E).Use

ascrewdrivertosecuregroundscrew(E)ontothemounting

bracket.Tuckallwiresneatlyintothejunctionbox.

FINISHING THE INSTALLATION

Placethexturebackplateovermountingscrews(B1)sothat

theyprotrudethroughtheholesinthefrontofthebackplate.

Threaddeconuts(C)ontomountingscrews(B1).Twistuntilthe

backplateofthextureissnugagainstthewall.

Installhalogenbulbs,glass(S),andglass(L)inaccordancewith

thediagramabove.

Bulb Note: Use a tissue or paper towel to hold the bulb and

push down into the socket. Oils and dirt can cause the bulb life

toshorten.Rubbingalcoholisrecommendedtocleanthebulbs

when needed.

Your installation is now complete. Turn on the power and test the

xture.

CLEANING TIPS

Treat the xture gently! Regular cleaning will reduce the need for deep cleaning. For regular cleaning, turn off the light and wipe down the

xture with a clean lint-free cotton or microber cloth. Never spray cleaner directly onto the xture.

For Customer Service, contact

the place of purchase to arrange

for replacement parts.

BLACK

(Hot)

WHITE

(Neutral)

GREEN

(Ground)

HOUSE WIRES

SMOOTH

(Or Black)

FIXTURE WIRES

RIBBED

(Or White)

BARE COPPER

(Or Green)

TOTAL

3PCS

TOTAL

6PCS

Podsumowanie treści

Strona 1 - FINISHING THE INSTALLATION

Assembly Instructions: 9942-WSC GL (Aiyana)IMPORTANT: • ALL INSTALLATION WORK SHOULD BE DONE BY ACCREDITED PROFESSIONAL. • SHUT OFF POWER SUPPLY AT

Komentarze do niniejszej Instrukcji

Brak uwag

Golden-lighting 9942-WSC GL Instrukcja Użytkownika

Przeglądaj online lub pobierz Instrukcja Użytkownika dla Oświetlenie Golden-lighting 9942-WSC GL. Golden Lighting 9942-WSC GL User Manual Instrukcja obsługi

Podsumowanie treści

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Oświetlenie Golden-lighting 9942-WSC GL