Golden-lighting 6390-BA1 WG Instrukcja Użytkownika

Przeglądaj online lub pobierz Instrukcja Użytkownika dla Oświetlenie Golden-lighting 6390-BA1 WG. Golden Lighting 6390-BA1 WG User Manual Instrukcja obsługi

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 1
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 0
Assembly Instructions: 6390-BA1 WG (Coronada)
IMPORTANT:
• ALL INSTALLATION WORK SHOULD BE DONE BY ACCREDITED PROFESSIONAL.
• SHUT OFF POWER SUPPLY AT FUSE OR CIRCUIT BREAKER!
• USE ONLY THE SPECIFIED BULBS. DO NOT EXCEED THE MAXIMUM WATTAGE!
PREPARING FOR INSTALLATION
Remove all of the contents from the carton. See the important notes
above. Shut off the power at the circuit breaker and completely
removetheoldxturefromthewall,includingtheoldmounting
strap.
Mountingstrap(B)containsseveralpairsofthreadedholes.Findthe
pairofholesthatmatchesthespacingoftheholesonthejunction
boxandyourxturebackplate.Twoofmountingscrews(A)should
beattachedtomountingstrap(B).Youmayneedtotightenthe
nutsthatholdthesescrewsinplace.Pullthehousewiresthrough
thecenterofmountingstrap(B).Placemountingstrap(B)over
thejunctionboxsothatmountingscrews(A)arehorizontal,andin
alignmentwiththeholelocationsonthexturebackplate(F).Secure
mountingstrap(B)tothejunctionboxwithmountingscrews(D)and
ascrewdriver.Tightenthescrewssecurely.
CONNECTING THE WIRES
Attachthexture’swirestothepowersupplywiresfromthejunction
box.Connectblacktoblack(orsmooth);whitetowhite(orribbed);
groundtoground(greenorcopper).Twisttheendsofthewirepairs
together,thentwistonawireconnector.Makesurealltwistsarein
thesamedirection.Ifthereisnogroundwire(greenorcopper)from
thejunctionbox,locategroundscrew(E)onmountingstrap(B)and
wrapthexturegroundwirearoundthegreengroundscrew(E).Use
ascrewdrivertosecuregroundscrew(E)ontothemountingbracket.
Tuckallwiresneatlyintothejunctionbox.
FINISHING THE INSTALLATION
Placexturebackplate(F)overmountingscrews(A)sothatthey
protrudethroughtheholesinthefrontofthebackplate.Thread
deconuts(G)ontomountingscrews(A).Twistuntilbackplate(F)of
thextureissnugagainstthewall.
Note: Completetheremainingstepsafterthextureishung.
Installtheprovidedhalogenbulb(H)intosocket(I).
Bulb Note: Use a tissue or paper towel to hold the bulb and push
it down into the socket. Oils and dirt can cause the bulb life to
shorten.Rubbingalcoholisrecommendedtocleandirtybulbs.
Carefullyslideglassshade(L)oversocket(I).Theglassshade
openingistight.Carefullypushdiffuser(J)whichisattachedto
diffuserbottom(K)downintoglassshade(K)andoverthesocket.
Twisttheglassdiffuserontothesocketthreads.Thiswillsecurethe
glassinplace.
Your installation is now complete. Turn on the power and test the
xture.
CLEANING TIPS
Treat the xture gently! Regular cleaning will reduce the need for deep cleaning. For regular cleaning, turn off the light and wipe down the
xture with a clean lint-free cotton or microber cloth. Never spray cleaner directly onto the xture.
For Customer Service, contact
the place of purchase to arrange
for replacement parts.
C
B
E
D
A
H
I
G
L
K
J
F
BLACK
(Hot)
WHITE
(Neutral)
GREEN
(Ground)
HOUSE WIRES
SMOOTH
(Or Black)
FIXTURE WIRES
RIBBED
(Or White)
BARE COPPER
(Or Green)
Przeglądanie stron 0
1

Podsumowanie treści

Strona 1 - CLEANING TIPS

Assembly Instructions: 6390-BA1 WG (Coronada)IMPORTANT: • ALL INSTALLATION WORK SHOULD BE DONE BY ACCREDITED PROFESSIONAL. • SHUT OFF POWER SUPPLY A

Komentarze do niniejszej Instrukcji

Brak uwag